水泵采购网

进口双级罗茨鼓风机-美国阿卡迪亚品牌

进口双级罗茨鼓风机Product description:

The gas cooling device includes a Roots blower and a cooling device. The Roots blower includes a first stage Roots blower and a second stage Roots blower. A cooling device is installed between the first stage Roots blower and the second stage Roots blower. The cooling device includes a mounting box, a first cooling device and a second cooling device. The first cooling device includes a gas storage chamber, a cooling chamber, a gas transport pipe and an isolation layer. The second cooling device includes a water tank and a water pipe. The gas cooling device of the two-stage Roots blower can rapidly cool down through the coolant and flowing water in the water pipe, while the refrigeration chip can deal with some emergencies, so as to better cool down the gas temperature, so that the overall cooling effect is better, the cooling efficiency is greatly improved, and the cooling range is adjustable, which can meet the output gas temperature under different conditions.

进口双级罗茨鼓风机characteristic:

There are more and more types of blowers. For example, the efficiency of two-stage roots blowers has been greatly improved compared with that of traditional single-stage roots blowers. However, two-stage roots blowers are also faced with the problem of excessive temperature during gas transmission, which leads to failures due to exceeding the maximum temperature of the fan. Multistage cooling devices are used to cool the gas in the fan, Ensure that the operation of the fan will not be affected by the gas temperature.

进口双级罗茨鼓风机Principle:

The gas cooling device of two-stage roots blower can realize the control range of gas temperature by installing the cooling device in the box. First, the gas is passed through the cooling chamber with coolant, and the temperature of the gas in the transport pipe can be adjusted by means of heat transfer; The water flowing in the water pipe can reduce the gas temperature again; The cooling fin can assist the gas temperature drop when the gas temperature drops slowly but needs to be cooled, so as to deal with some emergencies; Therefore, in the process of gas transmission, the gas can be cooled in three ways to ensure that the discharged gas can meet the gas temperature requirements under different conditions, which not only ensures the safety of the whole device, but also can achieve the purpose of cooling at any time, improving the overall working efficiency.

（仅供参考）