水泵采购网

进口离心过滤机美国阿卡迪亚品牌

进口离心过滤机Product Description:

It includes a machine base, a transmission part, a main shaft and a cover. The cover and the transmission part are fixed on the machine base. The main shaft is horizontally arranged and runs through the cover. The two ends of the main shaft pass through the two ends of the cover and are supported with the machine base through a bearing seat. The top end of the cover is provided with a feed port; The inner wall of the shell is provided with a filter screen, and the bottom of the shell is provided with a plurality of discharge ports along the direction of the main shaft. The empty mesh size of the filter holes of the filter screen decreases from one end of the feed port along the direction of the main shaft; The main shaft is provided with a plurality of scraper racks vertically fixed to it. One side of the scraper rack is provided with an adjusting rod. The adjusting rod is provided with an adjusting hole perpendicular to the main shaft. The scraper rack is provided with a locking hole. The locking hole and the adjusting hole are threaded with adjusting bolts. The end of the adjusting rod opposite the filter screen is provided with a scraper. The solid particles in the material can be separated in multiple sections.

进口离心过滤机characteristic:

The centrifuge can only perform solid-liquid separation of materials, and cannot perform segmented treatment according to the particle size of materials; The filter screen of a single section centrifuge is still integral. If the filter screen is damaged, the machine needs to be disassembled for screen replacement, which is quite complicated; The scraper of the existing centrifuge is single, and the clearance between the scraper and the filter screen cannot be directly adjusted, and the entire scraper will be deformed by centrifugal force. If the clearance needs to be adjusted, the scraper with different center distance needs to be replaced. Therefore, the clearance adjustment is troublesome, and several sets of scraper with different center distance need to be prepared, which wastes materials; The internal volume of the single section centrifuge is small, the loading is small, the working efficiency is low, and the equipment is equipped with no flushing water.

进口离心过滤机Principle:

The bottom of the shell is provided with a plurality of discharge ports along the direction of the main shaft, and the empty mesh size of the filter hole of the filter screen is successively reduced from one end of the feed port along the direction of the main shaft; The main shaft is provided with a plurality of scraper racks vertically fixed to it. One side of the scraper rack is provided with an adjusting rod. The adjusting rod is provided with an adjusting hole perpendicular to the main shaft. The scraper rack is provided with a locking hole. The locking hole and the adjusting hole are threaded with adjusting bolts. The end of the adjusting rod opposite to the filter screen is provided with a scraper

(仅供参考)